Sharp FO-4700, FO-5700, FO-5550 operation manual Timer Operations, Initial procedure

Timer Operations

Timer Operations

The Timer function allows you to set up an operation to be performed automatically at a specified time. Up to 48 operations can be set at any one time, and the time of each can be set up to a week in advance.

You can use this function to take advantage of lower off-peak rates without having to be there when the operation is performed.

Note: The DOCUMENT key cannot be used for a timer transmission.

Initial procedure

To set a timer operation, first perform the following procedure. After you have completed this procedure, go to the procedure for the specific operation you want to set (see the following pages).

1 Press the TIMER key.			TIMER
	The display will show:		T
		TIMER MODE
		1=SET, 2=CLEAR
2 Press 1 to select SET.			1
3 Press the * key or the # key until the
	desired operation appears in the
	display.
	Transmission (SEND MODE)
	Confidential transmission
	Polling
	Serial Polling
	Broadcasting
	Relay Request

5. Special Functions

101