Sharp FO-5700, FO-4700 Enter a backup fax number to be, dialed if the first number is busy

Programming Auto-Dial Numbers

7 Enter the name of the party by

pressing the letter entry keys S (max.of 20 characters). (Make sure the Rapid Key overlay is flipped down.)

∙If you don’t want to enter a name, go directly to Step 8.

H A R P

Example: SHARP

2. Sending Documents

8	START
	Press the START key.

9 Press 1 if the number programmed is	SET		CANCEL
an area code or access code to be used
for Chain Dialing (see Chain Dialing	1	or	2
at the end of this procedure). Press 2
(or START) if the number is a regular
fax number.

∙If you pressed 1 or are programming a Speed Dial number, go to Step 14. (Note: A backup fax number cannot be entered in a Rapid Key used for Chain Dialing.)

10 Enter a backup fax number to be	3	1	2	4	4	1	1
dialed if the first number is busy.

(If you don’t want to enter a backup	(Example)
number, go directly to Step 13.)

11 Press the START key.

START

43