Sharp FO-5550, FO-5700, FO-4700 operation manual Clearing auto-dial numbers

Programming Auto-Dial Numbers

Clearing auto-dial numbers

Note: You cannot clear a number if it is used in a program or timer oper- ation, if it is used to specify the relay fax machine in a relay group, or if it is included in a Group Key. First clear the number from the operation or group, then perform the following clearing procedure. To check where the number is used, print out the Program/Group List, the Timer List, and/or the Relay Group List as explained in Chapter 7.

1 Press these keys:

	FUNCTION	3	1
The display will show:
1:FAX/TEL. # MODE
1=SET, 2=CLEAR

2 Press 2 to select CLEAR.

2

3 To clear a Rapid Key, press the Rapid

Key. 2

B

To clear a Speed Dial number, press

the SPEED DIAL key and then enter Example: Rapid Key 2 the number with the numeric keys. (If

you enter less than 2 digits on the FO- 4700/FO-5550, or 3 digits on the FO- 5700, press the START key to complete the entry.)

4 Press the START key. START

2. Sending Documents

45