Reinforcing the Bass Sound | JVC 0802MWMMDWJEM, LVT0900-008A

Reinforcing the Bass Sound

The richness and fullness of the bass sound is clearly maintained regardless of how low you set the volume —Active Hyper Bass Pro.

•This effect does not affect recording. You can use this effect only for playback.

•This function also effects the sound from headphones.

To get the effect, press AHB PRO repeatedly so that “AHB BASS1” or “AHB BASS2” appears in the main display. The AHBPRO indicator also lights up on the display.

AHBPRO indicator

•Each time you press the button, the Active Hyper Bass Pro mode changes as follows:

AHB BASS1 AHB BASS2

BASS OFF (canceled)

• “AHB BASS2” is more effective than “AHB BASS1.”

To cancel the effect, press AHB PRO repeatedly until “BASS OFF” appears in the main display.

The AHBPRO indicator goes off from the display.

Selecting the Sound Modes

You can select one of the 4 preset sound modes.

•This effect does not affect recording. You can use this effect only for playback.

•This function also effects the sound from headphones.

To select the sound modes, press SOUND repeatedly until the sound mode you want appears in the main display.

The SOUND indicator also lights up on the display.

•Each time you press the button, the sound mode changes as follows:

ROCK POP CLASSIC

FLAT JAZZ (canceled)

ROCK: Boosts low and high frequency. Good for acoustic music.

POP: Good for vocal music or voice.

CLASSIC: Good for classical music.

JAZZ: Good for jazz music.

FLAT: Cancels the sound mode.

SOUND indicator

Ex.: When you select “ROCK.”

To check the sound mode currently selected, press

SOUND.

The currently selected sound mode will appear in the main display.

To cancel the sound modes, press SOUND repeatedly until “FLAT” appears in the main display.

The SOUND indicator goes off from the display.

– 14 –

Image 17

JVC 0802MWMMDWJEM Reinforcing the Bass Sound, Selecting the Sound Modes, To check the sound mode currently selected, press

Contents

UX-Z7MD-Consists of CA-UXZ7MD and SP-UXZ7MD Micro Component MD SystemPage Class Laser Product Introduction Precautions Contents Main unit Location of the ButtonsMain Unit Display window Display window on the electronic swing panel Pressing one of these buttons also turns on the unit Remote Control Getting Started Connecting AntennasUnpacking FM antenna You can connect the speakers using the speaker cords Connecting SpeakersAM antenna To connect an outdoor AM antenna To remove the speaker grilles Connecting External EquipmentTo connect external equipment Speaker grilles are removable as illustrated below R6PSUM-3/AA15F Putting the Batteries into the Remote Control Basic and Common Operations Remote control Turning On/Off the Key-touch Tone Turning On the PowerSetting the Auto Power Off To check the clock time with tones Setting the ClockTo turn off the clock indication power save mode For private listening To increase the volume, turn Volume + / control ClockwiseIf Cannot Listen appears in the main display Sound indicator goes off from the display To check the sound mode currently selected, pressReinforcing the Bass Sound Selecting the Sound Modes To select the illumination color Setting the Display IlluminationTo create your favorite colors To change the display brightness Listening to FM and AM Broadcasts Remote control Main unit To change the FM reception mode Tuning in to a StationOn the remote control only Press FM Mode To stop during searching, press ¢or 4or UP or Tuning in to a Preset Station Presetting StationsPress the number buttons to select a preset number Press SET Playing Back CDs CD-R/CD-RW Playing Back the Entire CD-Normal Play Precautions on CD Playback Basic CD Operations To go to another track directly using the number buttonsProgram Play To stop playback for a moment Playing at Random-Random Play To check the program contentsRepeating Tracks-Repeat Play To modify the program Playing Back MDs To locate a particular point in a track during play Basic MD Operations While playing or pausing About MD indicatorOn the remote control only Load an MD Press MD 3/8, then On the main unit only To prohibit disc ejection Tracks of the loaded MD will play at random To erase the entire program, press MD 0 to eject the MDTracks are played at random To skip the playing track, press ¢ Press Group Skip or Group Skip to select a group Playing Tracks in a Group-Group PlayTo go to another track in the same group, press ¢ or To go to another group, press Group Skip Searching for Tracks to Play MD Title Search Playing Back Tapes To change the information shown in the main display To play both sides-Reverse modePlaying Back a Tape Listening to External Equipment Listening to External Equipment Adjusting the Audio Input LevelFor how to apply sound effects, see Recording About the track marks Before You Start Recording on an MDTo avoid erasing important recordings To put a track mark manually while recording an Stereo Long-Hour Recording Mdlp Precautions for performing long-hour stereo recordingAbout High-Speed Recording To check the remaining recording time To set the recording length mode Setting MD Recording ModesTo set LP-prefix addition mode To set Group recording mode To record a single track during play or pause Recording Other Sources onto an MD Before You Start Recording on a Tape To clean the heads, capstans, and pinch rollersTo protect your recordings To keep the best recording and playback sound quality To record a single track of a CD/MD during play Recording onto a TapePrepare the source to record To record a disc To record an MD When recording on an MD and a tape at the same time Press REV.MODE to select the reverse modeFor the tape Press MD&TAPE REC Editing MDs How to make up Groups Using MD Group functionsGuidance-MD Group Functions Classifying the tracks on an MD Introducing Group Editing Functions Press SET During playback Forming a Group-FORM GRPress ¢or 4to select the first track of a new group Press ¢or 4to select the last track of the new group Adding a Track to a Group-ENTRY GR When Cannot ENTRY! appears in stepPress ¢or 4to select the track Or Group Skip Function on Dividing a Group-DIVIDE GRTo join the divided groups again, see the Join GR To divide the group again, see the Divide GR function When Cannot Join appears in stepJoining Two Groups-JOIN GR Moving a Group-MOVE GR Dissolving All Groups-UNGR ALL To cancel the setting, press CancelUngrouping Tracks-UNGROUP Erasing Tracks in a Group-ERASE GR Introducing Track Editing Functions Dividing a Track-DIVIDE Press or to precisely adjust the dividing pointPress ¢or 4to select the track you want to divide To join the divided tracks again, see the Join function Joining Two Tracks-JOIN When the track belongs to a groupTo divide the joined tracks, see the Divide function on If Cannot Join appears in step Press ¢or 4to select the track you want to move Moving a Track-MOVE Press SET Press ¢or 4to select the track you want to erase Erasing Tracks-ERASEErasing All Tracks-ALL Erase Assigning Titles to an MD Press or to change the title entry modeFor the group title For the disc and track title Repeat steps 5 1 and 5 2 to enter other characters Press Cancel to exit from the title entry modePress Enter to finish the current title entry For the disc title Make sure that the character you want to change is flashing Changing the TitleYou can make a correction or change the title Using the Timers How Recording Timer actually works Using Recording Timer How Daily Timer actually works Using Daily TimerTo turn off the Recording Timer after its setting is done To turn on the Recording Timer again To turn on the Daily Timer again To turn off the Daily Timer after its setting is doneVolume setting appears in the main display If the unit is kept turned on when the timer-on time comes How Sleep Timer actually works Using Sleep TimerTimer Priority Maintenance Additional Information Utoc User Table Of ContentsMD Disc Types Atrac Adaptive TRansform Acoustic Coding/ATRAC3 Scms Serial Copy Management System Symptoms CauseHcms High-speed Copy Management System MD limitations Cannot REC x1 or x2 only CD/MD MessagesCannot REC x1 REC only Message Symptom Troubleshooting Amplifier Section-CA-UXZ7MD Specifications Victor Company of JAPAN, Limited