– 48 –

5
Press SET.
• To cancel the setting, press CANCEL, then repeat
from step
4
.
6
Press GROUP SKIP or GROUP SKIP to
select the position where you want to move the
group.
7
Press SET.
• To cancel the setting, press CANCEL, then repeat
from step
4
.
8
Press ENTER.
“EDITING” appears in the main display for a while,
then “WRITING” and the MD REC indicator flash
while the editing you have made is being recorded on
the MD.

Moving a Group—MOVE GR

This function allows you to move a group.
Once a group is moved, the tracks and the other groups are
renumbered.
• To stop any time during the editing process before step
8
,
press GROUP TITLE/EDIT.
On the remote control ONLY:
In the following example, the process is explained from the
very first—that is, inserting a disc. You can also edit an MD
during playback (in Normal play mode).
1
Insert an MD you want to edit into the MD loading
slot.
2
Press GROUP TITLE/EDIT repeatedly until
“MOVE GR ?” appears in the main display.
• If you want to stop this editing process, press
CANCEL.
3
Press SET.
• If the loaded MD has only one or no group, you
cannot go to the following steps.
•During playback:
The group number of the currently playing track will
appear. If the track does not belong to any group, the
group number will be indicated by “– –.”
4
Press GROUP SKIP or GROUP SKIP to
select the group you want to move.
Ex.: When group 3 is moved to group 10.
Ex.: When group 3 is selected.
EN41-50UX-Z7MD[A]f 02.7.31, 21:2748