JVC LVT0900-008A, 0802MWMMDWJEM manual Erasing Tracks-ERASE, Erasing All Tracks-ALL Erase

Erasing Tracks—ERASE

This function allows you to erase unwanted tracks. You cannot resume the erased tracks.

Once tracks are erased, the other tracks and/or groups are renumbered.

You can erase up to 15 tracks at a time.

•To stop any time during the editing process before step 8, press TITLE/EDIT.

On the remote control ONLY:

In the following example, the process is explained from the very first—that is, inserting a disc. You can also edit an MD during playback (in Normal play mode).

1 Insert an MD you want to edit into the MD loading slot.

2 Press TITLE/EDIT repeatedly until “ERASE?” appears in the main display.

•If the loaded MD has no track, “ERASE?” will not appear.

•If you want to stop this editing process, press CANCEL.

3 Press SET.

4 Press ¢or 4to select the track you want to erase.

•You can select the track using the number buttons. In this case, the selected track starts playing repeatedly.

5 Press SET.

“ ” appears in the main display.

The track marked with “ ” will be erased.

Ex.: When track 5 is selected.

•When you do not want to erase the track, press CANCEL to remove “ .”

6 Repeat steps 4 and 5 to select all the tracks you want to erase.

•You can select up to 15 tracks. If you select a 16th track to erase, “MEMORY FULL” will appear in the main display.

7 Press ENTER.

8 Press ENTER.

“EDITING” appears in the main display for a while, then “WRITING” and the MD REC indicator flash while the editing you have made is being recorded on the MD.

Erasing All Tracks—ALL ERASE

This function allows you to erase all the tracks on an MD. You cannot resume the erased tracks.

On the remote control ONLY:

In the following example, the process is explained from the very first—that is, inserting a disc. You can also edit an MD during playback (in Normal play mode).

1 Insert an MD you want to edit into the MD loading slot.

2 Press TITLE/EDIT repeatedly until “ALL

ERASE?” appears in the main display.

•If you want to stop this editing process, press

CANCEL.

3 Press SET.

• To cancel the setting, press CANCEL.

4 Press ENTER.

“EDITING” appears in the main display for a while, then “WRITING” and the MD REC indicator flash while the editing you have made is being recorded on the MD.

“BLANK DISC” appears in the main display.

– 55 –