– 46 –

5
Press ¢ or 4 to select the track as the dividing
point.
The track selected in this step will be the first track in
the divided group.
• You can select the track using the number buttons. In
this case, the selected track starts playback
repeatedly.
• You cannot select the first track in a group or an
ungrouped track as the dividing point.
6
Press SET.
• To cancel the setting, press CANCEL, then repeat
from step
4
.
7
Press ENTER.
“EDITING” appears in the main display for a while,
then “WRITING” and the MD REC indicator flash
while the editing you have made is being recorded on
the MD.
To join the divided groups again, see the JOIN GR
function on page 47.

Dividing a Group—DIVIDE GR

This function allows you to divide one group into two
separate groups.
You cannot divide the group containing only a single track.
When the original group has a title, two separate groups are
reassigned the same title as the original group.
Once a new group is divided, the other groups are
renumbered.
• To stop any time during the editing process before step
7
,
press GROUP TITLE/EDIT.
On the remote control ONLY:
In the following example, the process is explained from the
very first—that is, inserting a disc. You can also edit an MD
during playback (in Normal play mode).
1
Insert an MD you want to edit into the MD loading
slot.
2
Press GROUP TITLE/EDIT repeatedly until
“DIVIDE GR?” appears in the main display.
• If you want to stop this editing process, press
CANCEL.
3
Press SET.
• If the loaded MD has no group, you cannot go to the
following steps.
•During playback:
The currently playing track number and its group
number will appear. If the track does not belong to
any group, the group number will be indicated by
“– –.”
4
Press GROUP SKIP or GROUP SKIP to
select the group you want to divide.
Ex.: When track 8 is selected.
The first track of the selected group
Ex.: When group 2 is selected.
EN41-50UX-Z7MD[A]f 02.7.31, 21:2746