– 44 –

Forming a Group—FORM GR

This function allows you to form a group from a series of
tracks which do not belong to the other groups. You can
form a group from a single track.
Once a new group is formed, the other groups are
renumbered.
• You can form up to 99 groups on a single MD.
• To stop any time during the editing process before step
8
,
press GROUP TITLE/EDIT.
On the remote control ONLY:
In the following example, the process is explained from the
very first—that is, inserting a disc. You can also edit an MD
during playback (in Normal play mode).
1
Insert an MD you want to edit into the MD loading
slot.
2
Press GROUP TITLE/EDIT repeatedly until
“FORM GR ?” appears in the main display.
• If you want to stop this editing process, press
CANCEL.
3
Press SET.
•During playback:
The currently playing track number starts flashing.
4
Press ¢ or 4 to select the first track of a new
group.
• You can select the track using the number buttons. In
this case, the selected track starts playback
repeatedly.
5
Press SET.
• If the selected first track belongs to another group,
“GROUP TRACK” appears in the main display.
Select the track correctly in step
4
again.
• If you want to form a group from the selected track
only, go to step
7
.
• To cancel the setting, press CANCEL, then repeat
from step
4
.
6
Press ¢ or 4 to select the last track of the new
group.
• You can select the track using the number buttons. In
this case, the selected track starts playback
repeatedly.
7
Press SET.
• If the selected last track belongs to another group,
“GROUP TRACK” appears in the main display.
Select the track correctly in step
6
again.
• To cancel the setting, press CANCEL, then repeat
from step
4
.
8
Press ENTER.
“EDITING” appears in the main display for a while,
then “WRITING” and the MD REC indicator flash
while the editing you have made is being recorded on
the MD.
To dissolve the group again, see the UNGROUP function
on page 49.
When “CANNOT FORM!” appears in step
7
You are trying to form a new group which includes another group
between the first and the last track. In this case, dissolve the
previous group and form a new one again.
Ex.: When track 3 is selected.
Ex.: When track 5 is selected.
EN41-50UX-Z7MD[A]f 02.7.31, 21:2744