Xerox 550 Deleting exceptions from your job, Printing dynamic page exceptions, Click Exceptions

Deleting exceptions from your job 69

10.Under Image Position, do one of the following:

●To keep the image in the same position as the rest of the job, make sure the Same as job check box is selected.

●To shift the image on the second side of the sheet according to the image shift on the first side of the sheet, select the Same on Both Sides check box.

11.Click Save.

12.Click Apply.

13.Click Save or Submit.

Deleting exceptions from your job

1.Open the job parameters window of your job.

2.Click Exceptions.

3.Select the exception that you want to delete.

4.Click Remove.

Dynamic page exceptions and setpagedevice commands

A setpagedevice command is a standard PostScript command that is embedded in a file and enables you to print a complex job that contains paper of varying size, coating, weight, and so forth.

Such commands indicate that the printer must switch media during the printing of a job. When a job is RIPed, the CX print server identifies the setpagedevice commands and maps them to the selected types of paper. The printer then uses those types of paper for the job.

Page exceptions and inserts that include setpagedevice commands are called dynamic page exceptions. The CX print server supports dynamic page exceptions for the following file formats:

●PostScript

●VPS

●PDF

Printing dynamic page exceptions

Requirements:

A file with embedded setpagedevice commands.

1.From the Tools menu, select Resource Center.

2.In the Resource list, select Virtual Printers and either create a new virtual printer or edit an existing one.

3.Select the Support dynamic page exceptions check box.