Xerox 550, 560 manual Bleed, Maximum bleed or enter a size for Custom bleed size, Creep

Imposition tab in the job parameters window 97

Parameter	Option	Description
	Bleed	● Extends part or all of the printed image beyond the
		trimming boundary.
		● Ensures that an inaccurate trim setting will not leave
		undesired white space at the edge of the page.
		● Produces sharp page boundaries with color that extends
		all the way to the edge of the page.
		The value that you enter depends on the paper size and
		imposition method that you choose. You can select
		Maximum bleed or enter a size for Custom bleed size.
		Notes:
		● You cannot extend the bleed beyond the sheet fold lines.
		Bleed does not affect the position of a crop.
		● Bleed must be defined in your DTP application in order
		for the CX print server to be able to apply bleed options.
	?	Enables you to view help on spacing and marks.
	Preview	Enables you to view your imposition layout and settings. You
		can open the Preview window at any time and keep it open
		to check your imposition settings as you select them. The
		Preview window dynamically reflects any changes that you
		make.
Creep	Creep	Creep is used to compensate for the physical shift of the
		inner sheets of a saddle stitch booklet. Set the size of the
		page shift from or towards the spine.
		Provides the following options:
		● Creep in
		● Auto—Automatically sets a value based on the
		paper's weight.
		● Custom—Enables you to set a custom creep in
		value.
		● Creep out—Enables you to set a creep out value.
		Note: This is only available with Saddle stitch.
	Preview	Enables you to view your imposition layout and settings. You
		can open the Preview window at any time and keep it open
		to check your imposition settings as you select them. The
		Preview window dynamically reflects any changes that you
		make.