Xerox 560, 550 manual Requirements, From the Tools menu, select Calibration

18 Chapter 3—Calibration

Performing off-the-glass calibration from the Creo Color Server

Requirements:

●Make sure that the Calibration is done off-the-glassoption is selected in the Preferences window.

Calibrate both the printer and scanner at the same time. If you place only the print chart on the platen, the printer is calibrated. If you place only the scanner chart on the platen, the scanner is calibrated.

1.From the Tools menu, select Calibration.

2.Complete the preliminary steps required before you start the off-the-glass calibration, and then click Next.

3.In the Tray list, select the desired tray. The default tray is Tray 1.

4.In the Screening list, select the screening method.

5.In the Number of copies box, enter the number of copies you want to print.

Note: It is recommended that you print at least 25 copies of the calibration chart, and then use one of the last copies printed.

6.(Optional) Select the Print calibration instructions check box to print the calibration instructions.