Xerox 560, 550 manual Printing with exceptions, Adding exceptions to your job, Click Exceptions

68 Chapter 8—Production workflows

Note: The page that was previously in the target location is not automatically moved to another location. To retain this page, manually move this page to a new location.

If you have a duplex template and the Apply changes to front and back check box is selected, the page number for the back side of the page also changes when you move the page to a new location.

Printing with exceptions

Adding exceptions to your job

Add exceptions when you want to print ranges of pages on different types of media, or insert blank media between pages.

1.Open the job parameters window of your job.

2.Click Exceptions.

3.In the Type list, select the pages in your job in which the media type will be different.

4.Depending on the option you selected in the Type list, perform one of the following steps:

●For Page range, type the page range in the box.

●For Front cover or Back cover, select Duplex to print the first two (or last two) pages of the job as the cover page (back cover).

Note: If the imposition type is Saddle Stitch, select Cover to print both a front and back cover page on a different media type. Select Middle sheet to print the internal sheet on a different media type.

●For Inserts, select Before or After and type the page number that will precede or follow the insert. Then, in the Quantity box, type the total number of inserts you want to add.

5.In the Paper Stock list, select the media type.

6.Click Advanced Options.

7.In the Destination profile list, select a destination profile. You can select per page or a range of pages.

8.In the Trim orientation list, select the orientation for the pages with exceptions defined. By default this is set to Same as job.

9.If you have a Light Production finisher connected and you want a Z-fold in your job, from the Folding list, select Z-fold.