Xerox 550, 560 manual Preview

Imposition tab in the job parameters window 95

Parameter	Option	Description
	Preview	Enables you to view your imposition layout and settings. You
		can open the Preview window at any time and keep it open
		to check your imposition settings as you select them. The
		Preview window dynamically reflects any changes that you
		make.
Templates	Layout	Provides the following options:
		● Best Fit—Automatically calculates the most suitable
			number of columns and rows.
			Note: This option is not available for the saddle-stitch
			and perfect bound imposition methods.
		● Custom—Enables you to specify how many pages to
			place horizontally (Rows) and vertically (Columns) in a
			custom layout.
			Note: Templates that are created or imported via the
			Imposition Template Builder are also available.
	Print method	Provides the following options for how the document will be
		printed:
		●	Simplex
			Note: This option is not available for the saddle-stitch
			and perfect bound imposition methods.
		●	Duplex HTH
		●	Duplex HTT
	Binding	Note: This option is available only if the imposition method
	selection
		is either Saddle stitch or Perfect bound and the template
		is 2 x 1, 2 x 2, 4 x 2, or 4 x 4.
	North south	Places pages 180° from each other, on the same side of the
		imposed sheet. Use this option when a step-and-repeat 2x1
		or 1x2 template is selected.
	Rotate 90 deg	Rotates the entire template 90 degrees to the right, enabling
		you to correct imposition conflicts.
Spacing & Marks		Provides a visual reference for the parameters when you
		click the question mark icon.