Xerox 550, 560 manual Click Next

Creating a calibration table using the X-Rite i1 spectrophotometer 21

Notes:

●If at any stage the scanning is not completed properly, click Reset and scan again.

●If an error occurs while you are scanning the chart, an alert message appears. Click OK and rescan the chart.

8.Click Next.

9.To save the calibration table, perform one of the actions:

●Select As default name to automatically name the

calibration table using the screening method, media type, and date.

●Select Save as to type your own name.

Note: It is strongly recommended that you include the media type, and screening method in the calibration table file name.

10.Select the media type to which to apply the calibration table.

11.Click Finish.