Xerox 550 Exceptions tab in the job parameters window, Add and delete page exceptions and inserts

Exceptions tab in the job parameters window 109

Exceptions tab in the job parameters window

Add and delete page exceptions and inserts

Parameter	Option	Description
Exceptions	Type	Define the type of exception for your job. Provides the
		following options:
		● Page range—Type the range of pages for the
		exception.
		● Front cover or Back cover—SelectDuplex to print the
		first two (or last two) pages of the job as the cover page
		(back cover).
		Note: If the imposition type is Saddle Stitch, select
		Cover to print both a front and back cover page on a
		different media type. Select Middle sheet to print the
		internal sheet on a different media type.
		● Inserts: Select Before or After and type the page
		number that will precede or follow the insert. Then, in
		the Quantity box, type the total number of inserts you
		want to add.
	Tray	The destination tray for the output.
	Advanced Options	The option is only available when you select Page Range,
		from the Type list.
		Provides the following options:
		● Destination profile—Enables you to select the same
		destination profile that is selected for the job, or select a
		different profile from the list.
		● Trim orientation—Enables you to select the orientation
		for the pages that include exceptions. By default this is
		set to same as job.
		● Folding—Applies z-fold to the exception pages
		● Image Position
		● Same as job—Enables you to position the images in
		the same position as the images in the rest of the
		job.
		● Same on Both Sides—Shifts the image on the
		second side of the sheet according to the image shift
		on the first side of the sheet.
		● You can also manually define the shift for odd and
		even pages, and center the pages on the sheet.