Xerox 560, 550 manual Emulate source

104Chapter 11—Job parameters

Parameter	Option	Description
	Emulate source	Emulates the original paper tint if the tint is included in the
	paper tint	profile.
		Notes:
		● If you select Emulate source paper tint, you cannot
			select Preserve pure CMY colors.
		● If the job is simplex, only the front side will be printed
			using the tint emulation.
		● If you select Emulate source paper tint, Absolute is
			used as the rendering intent.
	RGB source	Enables you to select an RGB source profile.
	profile
	RGB rendering	Provides the following options (for information on each
	intent	option, see the descriptions of the CMYK rendering intent
		options in this table):
		●	Auto
		●	Relative
		●	Absolute
		●	Saturation
		●	Perceptual
	Apply CMYK	To convert RGB elements according to the selected CMYK
	emulation	emulation method, select the Apply CMYK emulation. The
		RGB elements receive the same look as the CMYK
		elements, creating a unified appearance.
	Destination Profile	Provides the following options:
		● Linked—Uses the destination profile that was linked
			using the Media and Color Manager in the Resource
			Center.
		●	Xerox560
Spot color	Spot color	Provides the following options:
		● Spot Dictionary—Applies the CMYK values that are
			defined in the spot color dictionaries. You can edit these
			values using the Spot Color Editor tool. The spot color
			dictionaries supported are: HKS, DIC Color Guide,
			Pantone, Pantone GOE, Pantone Plus, and TOYO.
			Refer to the Spot Color Editor window for the complete
			list.
		● Original file values—Uses the CMYK values from your
			file.
		● Destination Profile—Uses the destination profile that is
			selected under Color > Color Flow, and applies it to the
			spot CMYK values.