Xerox 550, 560 manual Touch Network Scanning, Touch the Advanced Settings tab

Performing off-the-glass calibration from the Creo Color Server 19

7.Click Print.

The calibration chart prints.

8.Click Next.

9.On the platen glass of the printer, place the scanner chart and the off-the-glass calibration chart next to each other, facing down.

10.On the printer’s touch screen, touch Services Home.

11.Touch Network Scanning.

12.On the Network Scanning tab, touch the calibration scan box.

13.Touch the Advanced Settings tab.

14.Touch the Color Space button to select the specific color space of the Xerox Color 550/560 Printer.

15.Touch the Device Color Space button.

16.Touch Save.

17.On the control panel, press Start to start scanning the charts.

The charts are scanned and measured and a calibration table is created. In the CX print server Calibration Wizard, if the calibration is successful, step 3 of the Calibration wizard appears.

If an error occurs during the scanning process, an error message appears.

18.Click Next.

19.To save the calibration table, do one of the following:

●Select As default name to automatically name the calibration table using the screening method, media type, and date.

●Select Save as to type your own name.

Note: For best results, include the media type, and screening method in the calibration table file name.

20.Select the media type to which to apply the calibration table.

21.Click Finish.