NILES’ HD HIGH-DEFINITION Voice Matching | Niles Audio HDLCR

NILES’ HD HIGH-DEFINITION VOICE MATCHING

Ensures compatibility with other Niles HD High-Deﬁnition in-wall, on-wall, and ceiling-mount models to accommodate a wide range of system designs.

DOLBY® DIGITAL READY

The HDLCR is speciﬁcally designed for Home Theater Sound. This model exceeds the speciﬁcations set forth by Dolby Laboratories for the accurate reproduction of Dolby Digital-Encoded Sources.

INSTALLATION CONSIDERATIONS

Figure 1. Mounting an HDLCR loudspeaker into an wall.

Bracket

New Construction Wings

Frame

Speaker Bafﬂe

IR Sensor Knockout

Grille

Acoustic Fine

Tuning Controls

NILES AUDIO CORPORATION – 1-800-BUY-HIFI		3

Image 5

Niles Audio HDLCR manual NILES’ HD HIGH-DEFINITION Voice Matching, Dolby Digital Ready, Installation Considerations

Contents

Hdlcr Congratulations Table of Contents Introduction Features and Benefits CTR L/R Mode Switch INSTALLER-SELECTABLE Acoustic Fine TuningEasy Retrofit Installation in Your Existing Home Microperf Aluminum Grilles Dolby Digital Ready Installation ConsiderationsNILES’ HD HIGH-DEFINITION Voice Matching Recommended Amplifier Power Tools and Precautions Incorporating a Remote Control Loudspeaker Wire Placing the Hdlcr AS the Front Left and Right Speakers Speaker PlacementInsulating the Wall Cavity Boundary Effect Hdlcr Placing AN Hdlcr AS the CENTER-CHANNEL Speaker Observe Safety First Running the Speaker Wire in NEW ConstructionInstallation Fundamentals About Drilling Scheduling and Preparation About Interior Walls Concealing Speaker WirePulling the Cable About Exterior Walls Planning the Speaker Wire Route Other Possible Speaker Wire Routes Include Speaker wiring Cutting Holes Installing the BracketNEW Construction Installing a Bracket Exact location of the wire on a set of plans Concealing Speaker Wire for a Future Installation Through 4 at a new location Existing Construction Installing a Bracket Painting the Grille and Frame Installing the FrameFinishing the Installation Setting the CTR L/R Mode Installing a Niles MS-100 Microsensor Connecting a speaker wire to the Hdlcr terminals Connecting and Installing the Speaker Checking Speaker Phase Adjusting the Tweeter Acoustic Fine Tuning Listening AT Higher Volumes Installing the GrilleCleaning Removing the Grille Removing the Speaker Specifications Limited Warranty Yes Warranty Registration Card L e s a u d i o C o r p o r a t i o n