Xerox 550, 560 manual Editing an imposition template, Click View Simulated Job, Click Rotate

Editing an imposition template 67

3.Select a job, and then click Select.

The parameters of the job appear with their values in the Simulate Imposition window.

4.Change the parameters as desired.

5.Click View Simulated Job.

The Preview window appears. A simulation of the job is displayed with the current imposition template applied.

Editing an imposition template

Rotating a page 180°

Use the template viewer to rotate one or more pages and change the location of pages on the sheet.

1.Make sure that the Apply changes to front and back check box is clear.

2.Select the desired page.

Note: To select multiple consecutive pages, click the first page, press and hold Shift, and then click the last page. Select multiple non- consecutive pages by pressing and holding Ctrl as you click each page.

The gray arrow on each page indicates the top of the page. The page number is indicated by the number that appears on each page.

3. Click Rotate 180 .

Rotating both the front and back sides of a page 180°

1.Select the desired page.

2.Select the Apply changes to front and back check box.

3.Click the Rotate 180 button.

Changing the position of a specific page on a press sheet

Changing the location of a page is often necessary when the step- and-continue imposition method is selected.

1.Click the target location that you want to move a page to. The target location turns blue.

2.Click the Page Number box, and type the number of the page that you want to move to the target location.

3.Press Enter.

The page moves to its new location.