GuestWorks and DEFINITY ECS Release 9

Issue 1

Technician Handbook for Hospitality Installations 555-231-743

November 2000

Installing the System

 

Connecting the Hospitality Adjuncts

72

 

 

Switch-to-INADS Connections

This connection is used for remote maintenance access to the switch from the Initialization and Administration System (INADS). The connectivity is different for the CMC switch than for the SCC or MCC switch.

NOTE:

This INADS connection is typically installed only for installations in the United States. Contact your local support organization to see if INADS is required in your service area.

Parts List

SCC and MCC

The AUX connector on the SCC or MCC switch

One B25A 25-pair cable for cross-connections [connect the central office (CO) trunk to the last wire pair on this cable]

Standard cross-connect hardware

One CO trunk for dedicated access.

CMC

The Modem connector on the switch (this port is found on the Processor Interface Cable of the CMC hardware labeled as P2)

One M25A cable (or equivalent 25-pin straight-through cable)

One U.S. Robotics®Sportster® 33.6K modem

One RJ11 modular cord

One 103A connecting block

Standard cross-connect hardware

One CO trunk for dedicated access.

Page 88
Image 88
Avaya 555-231-743 manual Switch-to-INADS Connections, Parts List SCC and MCC