GuestWorks and DEFINITY ECS Release 9

Issue 1

Technician Handbook for Hospitality Installations 555-231-743

November 2000

Translations and Testing

 

Switch-to-INTUITY Translations

165

 

 

TCP/IP Link (INTUITY)

On the INTUITY, you must do the following for the TCP/IP link:

Administer the TCP/IP networking

NOTE:

Before you can administer the TCP/IP networking, the TCP/IP feature must be enabled on the customer features window. Technical support must dial in and enable TCP/IP if it is not enabled.

Configure the LAN circuit card

Select a switch type (R4.4 only)

Administer the switch interface

Reboot the INTUITY system (R4.4 only).

Administer the TCP/IP Networking (R4.4)

Use the Networking Administration > TCP/IP Administration command to access the TCP/IP administration.

NOTE:

If this administration is already complete, verify that the settings are accurate for your installation.

UNIX Machine Name — Enter the UNIX name for the INTUITY system. This name is case-sensitive.

IP Address — Enter the IP address for the INTUITY system. From the previous examples, use 192.168.1.70 if using a dedicated private link.

Subnet Mask — Use the default of 255.255.255.0.

Default Gateway IP Address — This is an optional field. Leave it blank.

+

-------------------------------------------------

+

+

TCP/IP Administration

+

+

-------------------------------------------------

+

UNIX Machine Name: map5p

 

IP Address: 192.168.1.70

 

Subnet Mask: 255.255.255.0

 

Default Gateway IP Address:

+

-------------------------------------------------

+

Page 181
Image 181
Avaya 555-231-743 manual TCP/IP Link Intuity