GuestWorks and DEFINITY ECS Release 9

Issue 1

Technician Handbook for Hospitality Installations 555-231-743

November 2000

Translations and Testing

 

Miscellaneous Translations

124

 

 

Administering Analog Caller ID (Switch)

The TN2793B and TN793B analog line circuit packs can be administered to deliver Incoming Calling Line Identification (ICLID) data to stand-alone analog Caller ID display units or analog telephones with built-in Caller ID display units. For this feature to work, the serving central office (CO) must support delivery of Caller ID information over the trunks that are serving the switch. To administer this feature, do the following:

Administer the Caller ID system options.

Administer stations with Caller ID options.

Administering Caller ID

Use the change system-parameters features command to select the Caller ID protocol that matches the protocol used by the Caller ID units or telephones, and to enable display of Caller ID information for room-to-room calls. These options are set on a system-wide basis. Administer the following options:

Protocol for Caller ID Analog Terminals — The available protocols include:

Bellcore (default) — US protocol (Bellcore transmission protocol with 212 modem protocol)

V23-Bell— Bahrain protocol (Bellcore transmission protocol with V.23 modem protocol).

Display Calling Number for Room to Room Caller ID Calls

Enter y to display both name and number, or n to display name only. The information displayed on the telephone may be a security issue for the customer.

change system-parameters features

Page

1 of 10

FEATURE-RELATED SYSTEM PARAMETERS

 

 

Self Station Display Enabled?

y

 

Trunk-to-Trunk Transfer:

none

 

Automatic Callback - No Answer Timeout Interval (rings):

3

 

Call Park Timeout Interval (minutes):

10

 

Off-Premises Tone Detect Timeout Interval (seconds):

20

 

AAR/ARS Dial Tone Required?

y

 

Music/Tone on Hold:

music Port: 01B1101

Music (or Silence) on Transferred Trunk Calls?

no

 

DID/Tie/ISDN Intercept Treatment:

attd

 

Messaging Service Adjunct (MSA) Connected?

n

 

Internal Automatic Answer for Attendant Extended Calls?

n

 

Automatic Circuit Assurance (ACA) Enabled?

y

 

ACA Referral Calls:

local

 

ACA Referral Destination:

attd

 

ACA Short Holding Time Originating Extension:

3070

 

ACA Long Holding Time Originating Extension:

3070

 

Abbreviated Dial Programming by Assigned Lists?

n

 

Auto Abbreviated/Delayed Transition Interval (rings):

2

 

Protocol for Caller ID Analog Terminals:

Bellcore

 

Display Calling Number for Room to Room Caller ID Calls?

n

 

Page 140
Image 140
Avaya 555-231-743 manual Administering Analog Caller ID Switch, Administering Caller ID, FEATURE-RELATED System Parameters