GuestWorks and DEFINITY ECS Release 9
Technician Handbook for Hospitality Installations
555-231-743 Issue 1
November 2000
Translations and Testing
181Switch-to-INTUITY Translations
Mode Code Integration
The Mode Code Integration link requires administration on both the switch and the
INTUITY. Any switch types can use Mode Code Integration, but TCP/IP or X.25
are the recommended methods for messaging links.
Mode Code Integration Link (Switch)
Translating the Mode Code Integration link involves the following:
■Enabling the Mode Code feature
■Verifying that the default mode codes are accurate.
Mode Code Integration on the switch is described in the

DEFINITY ECS

Administrator’s Guide.

Use the display system-parameters features command, Page 5, to verify that
there is a y in the Mode Code Interface field.
change system-parameters features Page 5 of 10
FEATURE-RELATED SYSTEM PARAMETERS
Public Network Trunks on Conference Call: 5 Auto Start? n
Conference Parties with Public Network Trunks: 6 Auto Hold? n
Conference Parties without Public Network Trunks: 6 Attendant Tone? y
Night Service Disconnect Timer (seconds): 180 Bridging Tone? n
Short Interdigit Timer (seconds): 3 Conference Tone? n
Unanswered DID Call Timer (seconds): Intrusion Tone? n
Line Intercept Tone Timer (seconds): 30 Special Dial Tone? n
Long Hold Recall Timer (seconds): 0 Mode Code Interface? y
Reset Shift Timer (seconds): 0
Station Call Transfer Recall Timer (seconds): 0
DID Busy Treatment: tone
Allow AAR/ARS Access from DID/DIOD? n
Allow ANI Restriction on AAR/ARS? n Transfer Upon Hang-Up? n
Abort Conference Upon Hang-Up? n Abort Transfer? n
7405ND Numeric Terminal Display? n 7434ND? n
DISTINCTIVE AUDIBLE ALERTING
Internal: 1 External: 2 Priority: 3
Attendant Originated Calls: external