Avaya 555-231-743 Dial Plan Switch, Dial Plan Record, First Digit Table, Second Digit Table for

GuestWorks and DEFINITY ECS Release 9	Issue 1
Technician Handbook for Hospitality Installations 555-231-743	November 2000
Translations and Testing
Miscellaneous Translations	84

Dial Plan (Switch)

Use the change dialplan command to administer the switch dial plan based on the customer’s requirements. Unless otherwise instructed, set the Local Node Number to 1. For more information about the Dial Plan feature, see the DEFINITY ECS Administrator’s Guide.

NOTE:

The PMS interface supports 3-, 4-, or 5-digit extensions, but be aware that prefixed extensions do not send the entire number across the interface. Only the assigned extension number is sent. Therefore, you should not use prefixed extensions for numbers that are also going to use the Insert/Delete Digit function (see “Hospitality Parameters” on page 208 ).

change dialplan					Page	1 of 1
		DIAL PLAN RECORD
				Local Node Number: 1
				ETA Node Number:
Uniform Dialing Plan: none				ETA Routing Pattern:
FIRST DIGIT TABLE
First			Length
Digit - 1 -	- 2 -	- 3 -	- 4 -	- 5 -	- 6 -
1:			extension
2:			extension
3:			extension
4:			extension
5:			extension
6:			extension
7: misc
8: fac
9: fac
0: attd
*:		fac
#:	fac

The add second-digitcommand is used when a first digit is defined as misc in the Dial Plan. In this example, first digit 7 is used in several ways (70, 72x, 73x, and 74x are feature access codes, and 71x, 78xx, and 79xx are extensions).

add second-digit 7					Page	1 of	1
		SECOND DIGIT TABLE FOR		DIGIT 7
SECOND	DIGIT TABLE
Digit	Identification	Number of	Digit	Identification	Number of
		Digits			Digits
0: fac		2	5:		0
1: extension		3	6:		0
2: fac		3	7:		0
3: fac		3	8:	extension	4
4: fac		3	9:	extension	4