Avaya 555-231-743 manual Processor Channel Assignment

GuestWorks and DEFINITY ECS Release 9	Issue 1
Technician Handbook for Hospitality Installations 555-231-743	November 2000
Translations and Testing
Switch-to-INTUITY Translations	162

Assign a Processor Interface Channel

Use the change communication-interface processor-channels command to assign a processor interface channel.

■Proc Chan — Select a processor channel for this link. Use the first channel available.

■Enable — Enter y.

■Appl — Enter audix.

■Gtwy To — Not used for the AUDIX application.

■Mode — Enter s (for server).

■Interface Link — Enter the TCP/IP link number used on the ethernet data module screen. For this series of examples, link 1 was used.

■Interface Chan — Enter the TCP channel number (5002

or 6001-6999). This must match the TCP Port field of the INTUITY Switch Interface Administration screen. The recommended entry for an INTUITY system is 5002.

■Destination Node — Enter the node name for the INTUITY system as assigned on the Node Names screen. In these examples, audix is used.

■Destination Port — Use the default of 0.

■Session Local — Enter 1. This field must match the Local Node Number field on the switch dial plan.

■Session Remote — Enter 1. This field must match the AUDIX Number field on the INTUITY Switch Interface Administration screen.

■Mach ID — Enter 1. This field must match the AUDIX Number field on the INTUITY Switch Interface Administration screen.

change communication-interface					processor-channels			Page	1 of	8
			PROCESSOR CHANNEL ASSIGNMENT
Proc			Gtwy		Interface	Destination		Session		Mach
Chan Enable		Appl.	To	Mode Link/Chan		Node	Port	Local/Remote		ID
1:	y	audix		s	1 5002	audix	0	1	1	1

2:n

3:n