Avaya 555-231-743 manual AUDIX-MSA Node Names, Msa, IP Node Names

GuestWorks and DEFINITY ECS Release 9	Issue 1
Technician Handbook for Hospitality Installations 555-231-743	November 2000
Translations and Testing
Switch-to-INTUITY Translations	159

Assign Node Names

Using the change node-namesaudix-msacommand, assign a node name and IP address for the INTUITY system. For this example, the INTUITY system is named audix, and the IP address is 192.168.1.70. Any 192.168.x.x IP address is a non-public IP address. If you have a dedicated link to the switch, use the address shown in this example. If you are using the customer’s network, you may need to use a different address. If using the customer’s network, make sure that the IP addresses assigned here are unique within the network.

change node-names audix-msa					Page	1 of 1
			AUDIX-MSA	NODE NAMES
Audix	Names	IP Address	MSA	Names	IP Address
audix		192.168.1 .70	msa

Using the change node-names ip command, assign a node name and IP address for the switch. In this example, the switch is named guestworks, and the IP address is 192.168.1.10. The IP address in the example is a non-public address. Use this IP address if you are installing a dedicated direct link between the switch and the INTUITY system. The default node name entry is display-only and is not used for this application. You can add the node names in any order on this screen; the next time you display the node names, they will be in alphabetical order.

If the connection is going through a router instead of being a direct connection, you must also assign a node name to the router and enter the router’s IP address. In this example, the router is named router, and the IP address is 192.168.1.211.

change node-names ip					Page		1 of	1
				IP NODE NAMES
Name		IP Address		Name	IP Address
default	0	.0 .0	.0		.	.	.
guestworks	192.168.1		.10		.	.	.
router	192.168.1		.211		.	.	.
		. .	.		.	.	.
		. .	.		.	.	.
		. .	.		.	.	.
		. .	.		.	.	.
		. .	.		.	.	.
		. .	.		.	.	.
		. .	.		.	.	.
		. .	.		.	.	.
		. .	.		.	.	.
		. .	.		.	.	.
		. .	.		.	.	.
		. .	.		.	.	.
		. .	.		.	.	.
( 3 of 3 administered node-names were displayed )
Use ‘list node-names’		command	to see all the administered node-names

Use ‘change node-names ip xxx’ to change a node-name ‘xxx’ or add a node-name