Avaya 555-231-743 Testing the TCP/IP Link, Ping Results, ETH-PT Pass, PROCESSOR-CHANNEL Status

GuestWorks and DEFINITY ECS Release 9	Issue 1
Technician Handbook for Hospitality Installations 555-231-743	November 2000
Translations and Testing
Switch-to-INTUITY Translations	169

Testing the TCP/IP Link

The following tests can be run from the switch to test the link to the INTUITY:

■ping node-name name board CCs [packet-length YYYY repeat ZZZ], where name is the INTUITY node name; CCs is the equipment location of the C-LAN circuit pack; YYYY is the size of the test packet; and ZZZ is the number of times that the test will be repeated. The packet length defaults to 64 bytes, with a maximum of 1500 bytes.

ping node-name audix board 01B10
	PING RESULTS
End-pt Node-name	Port	Port Type	Result	Time(ms) Error Code
audix	01B1017	ETH-PT	PASS	8

■ping ip-address address board CCs [packet-length YYYY repeat ZZZ], where address is the INTUITY IP address; CCs is the equipment location of the C-LAN circuit pack; YYYY is the size of the test packet; and ZZZ is the number of times that the test will be repeated. The packet length defaults to 64 bytes, with a maximum of 1500 bytes.

ping ip-address 192.168.1.70 board 01B10
	PING RESULTS
End-pt ip	Port	Port Type	Result	Time(ms) Error Code
192.168.1.70	01B1017	ETH-PT	PASS	8

■status processor-channelsX, where X is the ethernet link number.

status processor-channels	1
PROCESSOR-CHANNEL STATUS
Channel Number:	1
Session Layer Status:	In Service
Socket Status:	Established TCP
Link Number:	1
Link Type:	ethernet
Message Buffer Number:	0
Last Failure:	Far end sent disconnect message
At:	05/10/99 20:24