GuestWorks and DEFINITY ECS Release 9 | Issue 1 |
Technician Handbook for Hospitality Installations | November 2000 |
Installing the System |
|
Activating the Systems | 12 |
|
|
Activating the Systems
See the appropriate installation document for information about activating the switch and the INTUITY system:
■For CMC installations, see Chapter 1 of DEFINITY ECS Installation, Upgrades and Additions for Compact Modular Cabinets.
■For SCC installations, see Chapter 3 of DEFINITY ECS Installation and Test for
■For MCC installations, see Chapter 3 of DEFINITY ECS Installation and Test for
■For installations with an INTUITY system, see Chapter 4 in the INTUITY installation documents.
Unless instructed otherwise, always activate your system using the default translation card.
Setting Up the Initial Options
After activating the systems, there are some initial administration options you must set up. In addition to the procedures given in this section, see the appropriate installation document for information about setting up the initial options:
■For CMC installations, see Chapter 1 of DEFINITY ECS Installation, Upgrades and Additions for Compact Modular Cabinets.
■For SCC installations, see Chapter 3 of DEFINITY ECS Installation and Test for
■For MCC installations, see Chapter 3 of DEFINITY ECS Installation and Test for
■For installations with an INTUITY system, see Chapter 5 in the INTUITY installation documents.
NOTE:
Before setting any options, ensure that the default translation card is being used on a GuestWorks or DEFINITY BCS switch. A default translation card is not used on a DEFINITY ECS or ProLogix switch.
Do the following to set up the initial options:
1.After the switch powers up, log on to the switch using the craft login ID and the crftpw password. Distributors should use the dadmin login ID.
