Avaya 555-231-743 manual Parallel Printer Translations Intuity, Customer Logins Switch

GuestWorks and DEFINITY ECS Release 9	Issue 1
Technician Handbook for Hospitality Installations 555-231-743	November 2000
Translations and Testing
Parallel Printer Translations (INTUITY)	233

Parallel Printer Translations (INTUITY)

For R4.4, use the Customer/Services Administration > System Management

>UNIX Management > Printer Administration > Install Printer Software command to set up the parallel printer on the INTUITY system. This command enables the printer port (lp1) for parallel printer operation.

For R5, use the UNIX Management > Printer Administration command to set up the parallel printer on the INTUITY system. This command enables the printer port (lp1) for parallel printer operation. You can select from Install Okidata 320 Printer Software or Install Okidata Laser Printer Software. Use the option that best matches your printer model.

Customer Logins (Switch)

Customer logins cannot be added using the craft login, but you can change passwords for existing customer logins (use list login to display the logins). If customer logins exist, use the following screen to change the passwords to the switch. The passwords must be three to six characters long using any combination of 0-9, a-z, and A-Z. You should change only the logins that the customer requests. Instruct the customer that the logins and passwords must be kept secure to avoid security issues.

change password staff1	Page	1 of	1
	PASSWORD ADMINISTRATION

Password of Login Making Change:

LOGIN BEING CHANGED

Login Name: staff1

LOGIN’S PASSWORD INFORMATION

Login’s Password:

Reenter Login’s Password:

Customer Logins (INTUITY)

Use the Customer/Services Administration > System Management > Password Administration > Assign/Change Password command to create a password for the customer. The customer will use the “sa” login. Remind the customer to change the password as soon as the system is turned over, and to change it frequently. You can also set the password aging option using the

Customer/Services Administration > System Management > Password

Administration > Assign/Change Password Aging command.