3Com manual CONFIGURING THE 6 COREBUILDER 7000 FAMILY ATM SWITCH, Logging in to the

CONFIGURING THE

6 COREBUILDER 7000 FAMILY ATM

SWITCH

This chapter describes the initial configuration of the CoreBuilder® 7000 family ATM switch. Using the terminal connected to the control port, you log into the system and assign network addresses to the CoreBuilder 7000 family ATM switch. This procedure enables the management of the site to recognize and communicate with the CoreBuilder 7000 family ATM switch. You also specify ATM connections between addresses, using the ATM protocol you have selected.

	The topics covered in this chapter include:
	■ Logging in to the LMA
	■	Integrated Fast Setup
	■	Additional Switch Configuration
	■	Viewing Network Statistics.
	■ Storing and Retrieving Configuration Parameters
	■ Upgrading from E-IISP to PNNI
Logging in to the	When you boot the CoreBuilder 7000 family ATM switch the following
LMA	login screen appears:
	-------------------------------
	-		CoreBuilder 7000	-
	-			-
	-	ATM	Backbone	Switch -
	-------------------------------
	Access level (read, write, admin):admin
	Password: