4 | INSTALLING AND CONNECTING |
COREBUILDER MODULES |
This chapter describes how to install and replace the CoreBuilder® 7000 family modules. The following modules are covered.
■Power Supply Module
■Switch Module
■
■Fan Tray
■Connecting to Network Devices
The installation procedures of the other modules of the CoreBuilder 7000 family modules are described in their respective guides.
This chapter also describes how to connect the CoreBuilder 7000 family
ATM switch to network devices.
Safety Precautions
When handling replacement parts, 3Com recommends that you always use a wrist strap connected to a proper ground. This helps prevent the module from being damaged by electrostatic discharge. Additionally, when not in use, the module should be stored in an antistatic bag.
If the system is powered on when you are replacing a module, do not insert any metal objects, such as a screwdriver or a finger with jewelry, in the open slot. This could cause burns or other bodily harm, as well as system damage.