3Com 7000 manual Switch Module

32CHAPTER 4: INSTALLING AND CONNECTING COREBUILDER MODULES

	Figure 3 Hot-Swapping a Redundant Power Supply
Switch Module	The CoreBuilder 7000 family ATM switch provides for a redundant switch
	module to ensure continued operation should the main switch module
	fail. For more information on the operation of the redundant switch
	module, see Chapter 10 in the Operations Guide.

This section includes the following topics:

■Installing a Switch Module

■Replacing a Switch Module

■Setting up Switch Module Redundancy

■Setting up Switch Module Hardware Redundancy

■Setting up Hardware Redundancy and LANE Redundancy

Installing a Switch To install a switch module in the CoreBuilder 7000 family ATM switch Module chassis:

1Remove the new card from its antistatic bag.

2Orient the card so its labelling is upright and make sure the inject handles are in the outward position.