3Com 7000 manual Storing and, Retrieving, Parameters, Configuration, includes the following topics

Storing and Retrieving Configuration Parameters 75

Table 17 Statistics Available

Menu Option	Path	Description
Reset Signaling Statistics	(4) STS: Statistics	Resets the signaling counters for a specified port.
	(10) SIR: Signaling-reset counters

Storing and	This section discusses the configuration upload/download facility and
Retrieving	includes the following topics:
Configuration		Configuration Upload/Download
Parameters	■
	■	Organizing Configuration Files
	■ Activating the Downloaded Configuration
	■ Uploading the Configuration of a Card
	■ Downloading the Configuration of a Card
	■ Loading Software and Configuration Data by Utilities
Configuration You can store (upload) the configuration of an installed card from its flash
Upload/Download memory to an external disk and restore it (download) to the flash memory
	of the original card — or to the flash memory of a different card of the

same type — at a later time. You can initiate this operation only through the LMA and not via a SNMP management application like Transcend.

This feature lets you:

■ Back up your switch configuration in case of switch failure ■ Transfer the configuration from one switch to another

■ Maintain various standard configuration templates which can be loaded according to requirement

The configuration upload works for individual cards installed in the CoreBuilder 7000: either the active switch card or a CoreBuilder 7X00 Interface Card. You select the card whose configuration you want to download or upload from a list of installed cards.

When the switch operates in single-IP mode, you can use this facility to upload the configuration of any of the installed cards through the LMA of the switch card. When the switch is operating in multiple-IP mode, you can use this facility to upload the configuration of the switch card only.