82CHAPTER 6: CONFIGURING THE COREBUILDER 7000 FAMILY ATM SWITCH
Table 18 Utilities for Upload/Download (continued)
Utility | Batch file name |
|
|
Download a configuration parameter group from the | grp_down.bat |
PC to the switch engine flash memory |
|
Erase a configuration parameter group in the switch | grperase.bat |
engine flash memory |
|
Set debug flag to ON | dbgon.bat |
Set debug flag to OFF | dbgoff.bat |
Download all software executable files to the flash | down_all.bat |
memory |
|
Download all SW executables except atmsw.fls | downpart.bat |
Download only atmsw.fls | downmain.bat |
Download all software executable files to the flash | downoper.bat |
memory and erase the configuration in flash memory |
|
|
|
Running a Batch File To run a batch file (.bat) on your CoreBuilder 7000 family ATM switch, do the following:
1Perform the menu item:
(1)SYS \(3) LOA \(3) LCL \ 1
2Reboot the CoreBuilder 7000 family ATM switch.
3Connect your PC to the Service Port of the CoreBuilder 7000 family ATM switch.
4In the PC, change the directory to the one containing the appropriate files.
5Run the appropriate batch file from Table 18: a Type the name of the batch file
b Type the appropriate ComPort switch (com1/com2)
c Type the appropriate Speed switch (19200/57600/115200) d Press Enter
e Choose desired option at a prompt(s) (if at all)
Returning to After the software has been stored or retrieved, the system will still be in Operational Mode load mode. To return the system to normal operational mode, use one of
the following methods.