3Com 7000 manual Integrated Fast, Setup

56CHAPTER 6: CONFIGURING THE COREBUILDER 7000 FAMILY ATM SWITCH

	To log in to the LMA:
1 Enter your access level (default is admin)
2	Enter your password
	After a successful login the LMA Main Menu is displayed as shown in
	Figure 12.
			CB7000 switch module - Main Menu:
		==========
		(1)	SYS: Platform config ->
		(2)	LEM: Lan Emulation ->
		(3)	CON: Connections ->
		(4)	STS: Statistics ->
		(5)	DIA: Testing & Diagnostics ->
		(6)	FTR: ATM features
		(7)	LOG: Logout
		(8)	VER: Version
		(9)	FST: Fast Setup
	Figure 12 LMA Main Menu
Integrated Fast	This section describes the Integrated Fast Setup procedure and contains
Setup	the following topics:
	■	Setup Modes
	■	Setup Procedure Sections
	■	Entering Data
	■	Navigation Aids
	■ Integrated Fast Setup Operation

Use the Integrated Fast Setup procedure to configure the minimum set of parameters needed to enable the CoreBuilder 7000 family ATM switch and its attached devices to function in the network.

With this procedure you can configure both the CoreBuilder 7000 family ATM switch card and all CoreBuilder 7X00 interface cards installed in it in one session.