3Com 7000 manual CoreBuilder 74XX Ethernet/ATM Interface Card, 23.4, 16.2, 20.7, 15.3

88CHAPTER 7: REDUNDANCY IN THE COREBUILDER 7000 FAMILY ATM SWITCH

Table 20 Typical Power Consumption of CoreBuilder 7000 Family Cards

CoreBuilder 74XX Ethernet/ATM Interface Card

7400 Ethernet/ATM interface card with 3C37400 4.5

■24 Ethernet ports (2 RJ-21 connectors)

■ATM interface receptacle unoccupied

7412 Ethernet/ATM Expansion Module with 3C37412 3.6

■12 Ethernet ports (1 RJ-21 connector)

■ATM interface receptacle unoccupied

7436 Ethernet/ATM Expansion Module with 3C37436 8.1

■36 Ethernet ports (3 RJ-21 connectors)

■ATM interface receptacle unoccupied

CoreBuilder 76XX Fast Ethernet Interface Card

7600F Fast Ethernet Interface Card with	3C37600	23.4
■ 16FX Fast Ethernet ports
7608F Fast Ethernet Interface Card with	3C37608	16.2
■ 8FX Fast Ethernet ports
■ 8 Fast Ethernet ports unoccupied
7660F Fast Ethernet Interface Card with	3C37660	1.8
■ 2FX Fast Ethernet ports
■ 14 Fast Ethernet ports unoccupied
7600T Fast Ethernet Interface Card	3C37601	20.7
■ 16TX Fast Ethernet ports
7608T Fast Ethernet interface card	3C37617	15.3
■ 8TX Fast Ethernet ports
■ 8 Fast Ethernet ports unoccupied
7662T Fast Ethernet module	3C37662	1.4

■2TX Fast Ethernet ports

■14 Fast Ethernet ports unoccupied

*The typical power consumption values represent typical traffic, load and line speed of the CoreBuilder and interface cards. Maximum power consumption of the cards is 10% higher than the typical values, and occurs when all card ports are working at full rate

† A redundant switch has the same power requirements as the active switch