Storing and Retrieving Configuration Parameters | 79 |
For loading a single item you can enter a full file name.
6Start upload to 100.0.0.111, file name switch/cfg/box_prof.cfg, Box Profile (Y/N)? y Load process started...
Loading the “Other” Data Type
The “Other” item allows you to specify a file type by code number. This option is relevant to configuration data items in the CoreBuilder 7X00 cards and are specified in the Release Notes for those products; the configuration data item and its number
If you want to upload the “Other” data type, proceed as follows from step 3:
3Select File type: 9
4Insert file type
5Server IP address: 100.0.0.111
6Name of file to be uploaded: switch/cfg/unknown.cfg
7Start upload to 100.0.0.111, file name switch/cfg/unknown.cfg, 1001 (Y/N)? y
Load process started...
Downloading the To retrieve (download) the configuration of a card installed in the Configuration of a CoreBuilder chassis from disk to flash memory, first make sure that the
Card switch is connected to the TFTP server and then perform the following steps:
1Perform the LMA menu command:
(1)SYS\ (3) LOA \(7) TCD
2The LMA automatically presents you with a list of the installed cards whose configuration you can download from disk, for example:
Module Types: |
|
1<Switch | module 7000> |
2<Slot 3 | - 7600> |
3<Slot 4 | - 7600> |
4<Slot 5 | - 7400> |
5<Slot 6 | - 7200> |
Select Module: 1
