3Com 7000 manual PNNI is available in version 4.5 extended only

Integrated Fast Setup 61

Now reading the modules configuration, please wait ...

Special module configuration will be overridden by fast setup.

continue full fast setup or only switch fast setup (S<witch>, F<ull>): F

***Note: Full fast setup, special module configuration will be overridden.

Fast Setup Utility

==================

The flash configuration will be displayed below;

Update if needed, and then hit Enter.

To move		between	sections, enter the following characters at end of line:
< >	-	Back and forth in sections		>S	- Jump to section ID S
\	-	Back to	beginning of setup	$	-	To end of setup
Only in Virtual			Network Configuration section (group=slot; item=port):
}G	-	Jump to	group #G	+I	-	Jump to item #I
*	-	Update all group items		**	-	Update all section items
.T	-	Assign a VLT tag #T

Routing Mode Section In this section you are prompted to select PNNI or E-IISP as the routing protocol to be used. Enter 1 for PNNI or 0 for E-IISP.

Routing mode

=-----------

Select routing mode (1-PNNI, 0- E-IISP) : 1

PNNI is available in version 4.5 extended only.

Network Prefix Section In this section you are prompted for the network prefix of the switch. Enter values as appropriate. The following example shows a typical network prefix setting.