3Com 7000 manual Displays the physical layer statistics for a specified

74CHAPTER 6: CONFIGURING THE COREBUILDER 7000 FAMILY ATM SWITCH

information to the other ports (slave ports). For more information, see “Set and Save Clock Synchronization Mode” on page 120 in the Management Guide

Viewing Network At any time after configuring the CoreBuilder 7000 family ATM switch,

Statisticsyou can view the available statistics to see how the network is functioning. For example, you may want to display the general statistics for an overview of the network, or the signalling statistics for protocol information on specific ports. Table 17 lists the types of statistics available. To view a specific statistic, enter the menu path shown in the table. For more information, see the CoreBuilder 7000 Family ATM Switch Management Guide.

Table 17 Statistics Available

Menu Option	Path		Description
Display General Statistics	(4) STS: Statistics		Displays statistical totals for the switch.
	(1)	GEN: General switch stats
Display Physical Layer	(4) STS: Statistics		Displays the physical layer statistics for a specified
Statistics	(2)	PHY: Physical layer	port.
Reset Physical-Layer	(4) STS: Statistics		Resets physical statistics counters.
Statistics	(8)	PHR: Phy layer-reset counters
Display ATM-Layer Port	(4) STS: Statistics		Displays the ATM layer statistics for a specified
Statistics	(3)	ATM: ATM layer	port. Provides information on the capacity of traffic
	(1) PRT: Stats per port		within ports.
Reset ATM-Layer Port	(4) STS: Statistics		Resets the ATM-layer counters for a specified port.
Statistics	(9)	ATR: ATM layer-reset counters
	(1) PRT: Reset counters per port
Display ATM-Layer VPI/VCI	(4) STS: Statistics		Displays the ATM layer statistics for a VPI/VCI of a
Statistics	(3)	ATM: ATM layer	specified port.
	(2) VPC: Stats per VPI/VCI
Reset ATM-Layer VCI/VPI	(4) STS: Statistics		Resets counters for an individual and every VPI/VCI
Statistics	(9)	ATR: ATM layer-reset counters	for a specified port.

(2)VCC: Reset counters per

VPI/VCI

AAL5 Control Statistics	(4) STS: Statistics		Displays the control frames (AAL5 layer) statistics,
	(5)	CTL: Control frames	including protocol information, for a specified port.
	(1) GET: Get Control frames
Reset AAL5-Layer Control	(4) STS: Statistics		Resets AAL5-layer control statistics for a specified
Statistics	(5)	CTL: Control frames	port.
	(2) RES: Reset Control frames
Display Signaling Protocol	(4) STS: Statistics		Displays the signaling protocol statistics for a
Statistics	(6)	SIG: Signaling	specified port.