GuestWorks and DEFINITY ECS Release 9
Technician Handbook for Hospitality Installations
555-231-743 Issue 1
November 2000
Translations and Testing
82Miscellaneous Translations
Time of Day and Date (INTUITY)
For R4.4, use the Customer/Services Administration > System Management
> UNIX
®
Management > UNIX Date and Time command to set the time and date
on the INTUITY system. For R5, use the UNIX Management > UNIX Date and
Time command.
The switch time of day and date should already be set. See page 13 for
information about setting the time of day and date on the switch if it is not correct.
It is important that the switch and INTUITY system are set to the same time.
Call Vectoring on the switch page 150
Attendant Vectoring on the switch page 152
Dial by Name on the switch page153
Trunk-to-Trunk Transfer on the switch page 156
Table10. Checklist for Miscellaneous Translations
✔Procedure Begins
on...
+---------------------------------------------------------+
+ UNIX Date and Time +
+---------------------------------------------------------+
| Date: April 22, 1999 |
| |
| Time: 3:39 |
| |
| AM/PM: PM |
| |
| Timezone: US/Mountain |
| |
| Is Daylight Savings Time used: YES |
+---------------------------------------------------------+