GuestWorks and DEFINITY ECS Release 9 | Issue 1 |
Technician Handbook for Hospitality Installations | November 2000 |
Translations and Testing |
|
206 | |
|
|
■CDR Account Code Length — When setting up billing for forwarding faxes (see “Billing Considerations When Forwarding Faxes” on page 102 ), set this field to the number of digits used for extensions in the dial plan.
change |
|
|
| Page | 1 of 1 |
| CDR SYSTEM PARAMETERS |
| |||
Node Number (Local PBX ID): |
|
|
| CDR Date Format: month/day | |
Primary Output Format: printer | Primary Output Endpoint: eia |
| |||
Secondary Output Format: |
|
|
|
|
|
Use ISDN Layouts? | n |
|
| EIA Device Bit Rate: 9600 | |
Use Enhanced Formats? | n |
| Condition Code ‘T’ for Redirected Calls? n | ||
Modified Circuit ID Display? | n |
|
| Remove # From Called Number? n | |
Record Outgoing Calls Only? y | |||||
Suppress CDR for Ineffective | Call Attempts? y | CDR Call Splitting? y | |||
Disconnect Information | in Place of FRL? n | Attendant Call Recording? y | |||
|
|
|
| Interworking | |
Force Entry of Acct Code for Calls Marked on Toll Analysis Form? n |
| ||||
|
|
| Calls to Hunt Group - Record: | ||
Record Called Vector Directory | Number Instead of Group or Member? n |
| |||
Inc Trk Call Splitting? | n |
|
|
|
|
Record | n |
|
|
|
|
Record | n | Digits to Record for Outgoing Calls: dialed | |||
Privacy - Digits to Hide: | 0 |
| CDR Account Code Length: 4 |
| |
As shown on page 142, enable CDR Reports for each trunk group.
Testing the Switch-to-Call Accounting Link
To test the CDR link, use the status
status |
|
| CDR LINK STATUS |
Primary | Secondary |
Link State: up | extension not administered |
Maintenance Busy? no |
|
You should also work with the vendor to test the link from the call accounting end. If you are installing the INTUITY Lodging Call Accounting, work with the Homisco technician to test the link.
