Avaya 555-231-743 manual Enabling the Data Module Link, y Audix

GuestWorks and DEFINITY ECS Release 9	Issue 1
Technician Handbook for Hospitality Installations 555-231-743	November 2000
Translations and Testing
Switch-to-INTUITY Translations	176

Processor Channels

Use the change communication-interface processor-channels command to administer the processor channels.

■Proc Chan — Use channel 59. It is recommended that this should match the Session Local field used for this link.

■Enable — Enter y.

■Appl — Enter audix.

■Gtwy To — Not used.

■Mode — Not used.

■Interface Link — Enter the link number used on the data module screen.

■Interface Chan — Enter the Local Node Number as administered on the dial plan screen.

■Destination Node — Not used.

■Destination Port — Enter 0.

■Session Local — It is recommended that this should match the processor channel number used for this link. However, this value must match the Switch Port field on the INTUITY Switch/DCIU Interface Administration screen.

■	Session Remote — This must match the AUDIX Number field on the
	INTUITY Switch/DCIU Interface Administration screen.
■	Machine-ID— This must match the AUDIX Number field on the

INTUITY Switch/DCIU Interface Administration screen.

change communication-interface processor-channels							Page	4 of	8
		PROCESSOR CHANNEL ASSIGNMENT
Proc		Gtwy	Interface		Destination		Session		Mach
Chan Enable	Appl.	To	Mode Link/Chan		Node	Port	Local/Remote		ID
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59: y	audix		1	1		0	59	1	1
60:

Enabling the Data Module Link

You must now go back to the data module screen and enable the link. You should only enable the link for channel 01, the link that handles the messaging traffic.