GuestWorks and DEFINITY ECS Release 9

Issue 1

Technician Handbook for Hospitality Installations 555-231-743

November 2000

Translations and Testing

 

Switch-to-Call Accounting Translations

205

 

 

Switch-to-Call Accounting

Translations

You must assign the link between the switch and the INTUITY, administer the CDR parameters, and enable CDR for each incoming and outgoing trunk group that the customer wishes to record. If a stand-alone call accounting system (such as Xiox) is used, the vendor must assist in setting up the call accounting system.

Link Parameters (INTUITY)

The data link between the switch and the INTUITY Lodging Call Accounting must be administered by the Homisco technician when he or she installs the software on the INTUITY platform.

CDR Parameters (Switch)

Use the change system-parameters cdr command to assign the CDR parameters on the switch.

Primary Output Format — Enter printer (or the format required by the call accounting vendor).

Primary Output Endpoint — Do one of the following:

Enter eia if the call accounting system is directly connected to the switch using the DCE port.

Enter the data module extension if using a switched connection. A data module must be administered first before making this assign- ment.

EIA Device Bit Rate — If the output endpoint is set to eia, use the default of 9600 for the INTUITY Lodging Call Accounting system, and 1200 for the Xiox call accounting system. For other stand-alone call accounting systems, use the speed specified by the vendor.

Record Outgoing Calls Only — Unless the customer wishes to record incoming calls, enter y.

Page 221
Image 221
Avaya 555-231-743 manual Switch-to-Call Accounting Translations, Link Parameters Intuity, CDR Parameters Switch