Radio Shack ET-910 owner manual Using Redial, Switching Between the Handset and Speakerphone

43-1085.fm Page 18 Tuesday, August 17, 1999 2:31 PM

Switching Between the Handset and Speakerphone

To switch to the speakerphone at any time during a call while you are using the handset, simply press SPKR on the base so its red indicator turns on, then press OFF to turn off the hand- set.

To switch to the handset at any time during a call while you are using the speakerphone, simply lift the hand- set off the base. The red SPKR indi- cator turns off and the handset’s red TALK indicator turns on.

Note: If the handset is already off the base, you must first press TALK to switch from the speakerphone to the handset, then press SPKR so its red indicator turns off. If you do not, you will disconnect the call.

Using Both the Handset and Speakerphone

If you make or answer a call using the speakerphone, someone else can press TALK on the handset and join the conversation.

If you make or answer a call using the handset, one or more people can join the conversation by pressing SPKR on the base.

18

During the call, one of you can hang up and end the call at that keypad and let the call continue at the other keypad.

Or, you can both hang up at the same time to end the call.

USING REDIAL

To redial the last number dialed, press TALK to get a dial tone on the handset or press SPKR to get a dial tone on the base, then press REDIAL. The phone automatically dials the last number dialed.

		TONE	OPER 0	#
		PRIVACY / LOW BATT
TALK	INT.CM	MEM	PROG	REDIAL
		OFF
1	ABC 2	DEF 3
		HOLD	FLASH	PRIVACY
GHI 4	JKL 5	MNO 6
PRS 7	TUV 8	WXY 9
		INT.CM		SPKR
TONE	OPER0	#	VOLUME

HOLD FLASH PRIVACY

MEM PROG REDIAL

DIGITAL