Radio Shack ET-910 owner manual Special Features, Using Memory Dialing, Storing a Number Memory

43-1085.fm Page 21 Tuesday, August 17, 1999 2:31 PM

SPECIAL FEATURES

USING MEMORY

DIALING

You can store up to 10 numbers in the ET-910’s memory, then dial them at the press of a few buttons.

Notes:

•Each phone number can be up to 16 digits long.

•You can use either the base or the handset to program and dial stored numbers on the ET-910.

Storing a Number in

Memory

Note: You must complete Steps 1-3 within 30 seconds of each other. If you do not, the ET-910 sounds a long beep, all indicators stop flashing, and you must start over again at Step 1.

1.Press PROG on the handset or the base. The TALK indicator on the handset or the SPKR indica- tor on the base flashes.

2.Press the number key (0-9) of the memory location where you want to store the phone number.

3.Enter the phone number you want to store (up to 16 digits).

Notes:

•To store the last number you dialed, you can simply press

REDIAL.

•You can store special banking or telephone service num- bers (such as access codes or account numbers) in mem- ory.

•For security purposes, we recommend that you do not store private numbers in memory, such as personal identification numbers or passwords.

•If you have pulse service and want to use tone dialing, enter

TONE at the appropriate place in the sequence of num- bers.

•To store one or more pauses in the memory number, see “Storing a Pause in Memory” on Page 22.

•Each pause or TONE entry counts as one memory digit.

4.Press MEM (memory) to store the number in memory. The phone sounds a “chirping” beep and all indicators turn off.

			TONE	OPER 0	#
		PRIVACY / LOW BATT
TALK	INT.CM	OFF	MEM	PROG	REDIAL
1	ABC 2	DEF 3
			HOLD	FLASH	PRIVACY
GHI 4	JKL 5	MNO 6
PRS 7	TUV 8	WXY 9	INT.CM		SPKR
TONE	OPER0	#		VOLUME

HOLD FLASH PRIVACY

MEM PROG REDIAL

DIGITAL

21