Planar PT1505MU, PT1555MU, PT1501MX, PT1550MX, PT1500MX manual Express, Custom

25

2.Power on the computer.

3.No need to install USB driver from the CD as it is a HID device. The system will recognize the HID device and load the driver automatically. If the touchscreen is out of calibration, double click on the HID calibration utility* and do the 4 points calibration.

4.Install Windows® VISTA driver and follow the step-by-step instructions to get the full touchscreen features.

*A special calibration tool can be installed for improved touch position accuracy. See “Optional Capacitive Calibration Tool Install” section for more information.

If you are using a PC running Windows®,XP Embedded, follow the instructions below:

Express:

1.Power on the computer.

2.Make sure that the RS232 or USB cable is connected to the computer.

3.Be sure that your EWF is disabled. If your EWF is enabled, please disable the EWF by using the EWF Manager command or the EWF API; for example: ewfmgr c:-disable

4.Once the EWF is disabled click on the XP driver on the CD and follow the step-by-step instructions as shown on the pop-up windows.

Custom:

1.Power on the computer.

2.Make sure that the RS232 or USB cable is connected to the computer.

3.Follow the step-by-step instructions found in the zipped file on the CD.

If you are using a PC running Windows®,CE, follow the instructions