Planar PV150 manual Planar User’s Manual Monitor- Control Option, OSD Control Option

Planar User’s Manual

The Monitor- Control Option

Pressing the Adjust key while the Monitor Control icon is selected activates the Monitor Control submenu. Use the

◄FUNCTION► select buttons to scroll between the submenu items. You should only use this menu item if the results of the Auto Adjust function are not satisfactory.

H-Position:Press the Adjust buttons to horizontally move the display image to the desired position.

V-Position:Press the Adjust buttons to vertically move the display image to the desired position.

Phase: Press the Adjust buttons to fine-tune the displayed image. An improper phase adjustment will result in pixel jitter or display noise.

Clock: Press the Adjust buttons to stabilize the display clock timing. An improper clock setting will result in wide vertical bands on the display.

Reset: Press the Adjust button to reset the Monitor-Control submenu values to the factory default val- ues.

Exit: Press the Adjust button key to exit the Monitor-Control submenu.

OSD - Control Option

Pressing the Adjust key while the OSD Control icon is selected activates the OSD Control submenu. Use the ◄FUNCTION► select buttons to scroll between the submenu items.

OSD-H-Position:Press the Adjust buttons to horizontally move the OSD menu.

OSD-V-Position:Press the Adjust buttons to vertically move the OSD menu.

Exit: Press the Adjust button key to exit the OSD-Control submenu.

Misc. - Control Option

Pressing the Adjust key while the Misc Control icon is selected activates the Misc Control submenu. Use the ◄FUNCTION► select buttons to scroll between the submenu items.

Language: Press the Adjust buttons to select the desired OSD display language. Languages supported: Eng- lish, German, French, Spanish, and Italian.

Audio Volume: Press the Adjust buttons to increase or decrease the volume of the monitor speakers.

Information: The Information submenu displays the current resolution, vertical refresh rate, and monitor firmware version.

Exit: Press the Adjust button to exit the Misc-Control submenu.

Graphic Control Option

8