Planar PV150 manual topline menus are, Auto Adjust Procedure

Chapter 2

The 7-topline menus are:

The Auto Adjust option lets the monitor determine and select the settings that are most appropriate for your system requirements. This function will tune the display to your computers video card.

The Monitor-Control option allows you to adjust the LCD monitor’s display characteristics such as the display’s horizontal or vertical position, display phase, display clock, and factory reset. Adjusting these settings should only be necessary if the results from Auto-Adjust function are not satisfactory.

The OSD-Control option allows you to adjust the position and setting of the monitor’s On Screen

Display.

The MISC-Control option allows you to select the desired text language of the OSD, adjust the monitor speaker volume, and to display the current video information being sent to the monitor from your video card.

The Graphic-Control option allows you to adjust the display contrast, brightness, sharpness, and color settings.

The Graph/Tex option allows you to switch DOS text resolution from 640x400 and 720x400. This function has no effect within graphic operating systems such as MS Windows™.

The OSD Exit option closes the On Screen Display.

Auto Adjust Procedure

Pressing the Adjust key while the Auto Adjust topline menu is selected, activates the Auto Adjust procedure. The Auto Adjust procedure takes approximately 2 seconds to complete. Once finished, the OSD menu will disappear after a short time-out period.

7