TV Viewing This product has built-in TV channel selector. You
can watch TV by connecting the antenna to the LCD.
Settings for TV Viewing
To watch TV, set the channels by performing the following steps:
1. Make sure antenna or cable TV is connected to TV-IN and then turn on the
LCD.
2. Press INPUT (or TV on the remote) to switch to TV mode.
3. Press OSD MENU button (or MENU on the remote) to display OSD Main
Menu.
4. Use e/f buttons (or Å/Æ on the remote) to highlight the “Display
Settings” option, then press OSD MENU (or MENU on the remote) again.
5. Use e/f buttons (or Å/Æ on the remote) to select “Auto Program” option,
then press + (or↑on the remote).
TV channels are set automatically.
Change Volume
1. Press e button (or ← on the remote) to display the volume setting menu.
2. Use -/+ buttons (or↓/↑ on the remote) to adjust volume.
Change Channel
Use -/+ (or↑↓on the remote) to change channels.
Use the numeric numbers 0-9 & 100 + to change to specific
channels
For channels 1-9
1. Push any number 1-9.
For channels 10-99
1. Push any two numbers 0-9.
For channels 100+
1. Push “100+” followed by two numbers 0-9.
18