Auto-Adjust (in case of analog connection only) This product has built-in auto adjust function to obtain the best image display.
If the LCD has analog connection, perform auto adjust first.
※ No auto adjust is necessary in case of digital connection.
1. Turn on the power in the sequence of peripherals (including this product)
Æ computer.
2. Press the OSD MENU button.
OSD Main Menu is displayed.
3. Use e/f button to select the desired “basic setting”, then press OSD
MENU again.
4. Use e/f to select AUTO, then press + button.
The product will carry out auto adjust.
※ In case of Macintosh, boot the operating system and perform steps 2 ~
4 above after the screen display becomes still.
※ The auto adjust will take a few seconds, during which you won’t be able
to perform OSD function. If the effect of auto adjust is not satisfactory,
carry out manual adjustment.
17